During silica synthesis by sol–gel process under certain conditio

During silica synthesis by sol–gel process under certain conditions like restriction of gel growth, silica gets precipitated. In such preparation, the steps buy ARRY-438162 involved are coagulation and precipitation from silica solution. In the present investigation, we have focused our effort on preparing stable nanosilica from selleck screening library sodium silicate which was synthesized from Vietnamese rice husk using the sol–gel technique. Main text Materials Rice husk from the

natural rice source of Mekong Delta, Vietnam, was used. Sodium hydroxide, cetyltrimethylammonium bromide (CTAB), cetyl amine (CA), polyethylene glycol (PEG, 10,000), Arkopal, cethyl ammonium chloride (CAC), Aliquat 336, alkyl dimethyl benzyl ammonium chloride (ADBAC), cetylpyridiniumbromide (CPB), and cetyltrimethylammonium

chloride (CTAC) were purchased SRT2104 clinical trial from Merck (Darmstadt, Germany) and used as surfactant agents. Chlorhydric acid, sulfuric acid, and n-butanol were all purchased from Xilong (Guangzhou, China). Experimental procedure Pretreatment of the RHA The pretreatment of the RHA consisted of acid and thermal treatments. After treating the RH with 10% HCl and 30 wt.% sulfuric acid solution, the material was burned in a muffle furnace at 600°C for 4 h to remove all incorporated hydrocarbons. An acid washing step was used to remove the small quantities of minerals prior to silica extraction from RHA in the following manner. The calcinated RHA (10

g) was acid-leached with 10% HCl and afterwards 30 wt.% sulfuric acid solution at 100°C for 2 h in a Pyrex three-neck round-bottom flask equipped with a reflux condenser in a hemispherical heating mantle. Then, the slurry was filtered and washed with distilled water for several times until the pH value equaled 7. Preparation of sodium silicate solution Sodium hydroxide solution (3.5 mol/L) was added to the pretreated RHA and boiled for 5 h in a Pyrex three-neck round-bottom flask equipped with a reflux condenser in a hemispherical heating mantle to dissolve the silica and to produce a sodium silicate solution. The solution was filtered and washed with boiling distilled water. The final solid sample was cooled to room temperature. Synthesis of silica Methane monooxygenase nanoparticles Surfactant (2.0 wt.%) was dissolved in the water/butanol (1:1) solvent. Subsequently, RHA-derived sodium silicate was slowly added into the CTAB/water/butanol solution, and the mixture was stirred at 60°C. Then, 0.5 mol/L sulfuric acid solution was added gradually into the suspension in order to initiate the hydrolysis-condensation reaction at pH ~ 4. The resulting gel mixture was aged at 60°C for 8 h. Then, 0.5, 1.0, 1.5, 2.0, 2.5, and 3.0 wt.% of CTAB were dissolved in the water/butanol solvent with 1:1 ratio. Subsequently, RHA-derived sodium silicate was slowly added to the CTAB water/butanol solution that was being stirred at 60°C. Then, 0.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>